{"id":1878,"date":"2026-06-07T16:35:27","date_gmt":"2026-06-07T16:35:27","guid":{"rendered":"https:\/\/keytopbarefootshoes.com\/"},"modified":"2026-07-25T09:14:21","modified_gmt":"2026-07-25T09:14:21","slug":"barefoot-shoes-oem-mold-mildew-fixes","status":"publish","type":"post","link":"https:\/\/keytopbarefootshoes.com\/es\/barefoot-shoes-oem-mold-mildew-fixes\/","title":{"rendered":"Reparaciones de moho y hongos en calzado descalzo OEM: 3 soluciones de f\u00e1brica"},"content":{"rendered":"

barefoot shoes oem mold mildew is the first checkpoint buyers should lock before they approve a supplier, budget, or production slot. When you\u2019re evaluating a factory for your first barefoot shoe order, the last thing you want to unbox is a pair that smells musty and shows visible mold spots. That scenario kills crowdfunding trust and destroys margins before you even get a chance to sell. The fix for barefoot shoes OEM mold mildew fixes<\/a> isn\u2019t complicated\u2014but most importers look in the wrong place. They blame shipping containers when the real cause is already sealed inside the shoes before they left the factory floor.<\/p>

Ninety percent of mold cases trace back to one manufacturing step: boxing shoes before the adhesive has fully cured. Standard solvent-based PU glue releases moisture as it sets, and if that moisture gets trapped between the lining and the outsole for three to six weeks in transit, you get Aspergillus niger growth<\/a>. Most Jinjiang factories stack and box within 8\u201312 hours of gluing. A 48-hour forced-air outgassing period before boxing eliminates 90% of those cases\u2014and costs zero raw materials. That single process change is more effective than any post-shipment cleaning tutorial you\u2019ll find on Reddit.<\/p>

The three fixes that follow address the root cause at the manufacturing stage: adhesive management, lining material selection, and container desiccant dosing. Each comes with specific costs and performance data so you can make an engineering decision, not a marketing one.<\/p>\n

\"custom
<\/figcaption><\/figure>\n

Why Mold Grows in Your Barefoot Shoes Before They Arrive<\/h2>\n
\n

90% of mold in OEM orders starts with a skipped 48-hour adhesive outgassing. Not container humidity. The fix costs zero raw material.<\/p>\n<\/blockquote>\n

Most Jinjiang factories rush. They glue the sole at 9 AM and box the shoe by 5 PM. The standard solvent-based PU adhesive releases moisture vapor as it cures, but full cure takes 72 hours. Boxing a semi-cured shoe traps that vapor inside the lining alongside residual heat from the assembly line. You create a sealed microclimate at 30\u00b0C and 80% RH\u2014ideal conditions for Aspergillus niger<\/i> to bloom during a 4-6 week ocean freight voyage. This is the root cause, not ambient humidity or a leaky container.<\/p>\n

The only countermeasure is enforcing a mandatory 48-hour forced-air rest before any shoe touches a box. This single SOP change eliminates 90% of mold cases across production runs of 500 to 2,000 pairs. It costs zero in materials and requires no new equipment\u2014just a process discipline that most suppliers skip to save one day of floor space.<\/p>\n

\"barefoot
<\/figcaption><\/figure>\n

3 Factory-Level Fixes That Prevent Mold in Barefoot Shoe Shipments<\/h2>\n

Fix 1: Lining Swap for Active Moisture Rejection<\/strong><\/p>\n

Cotton canvas lining absorbs 15% of its weight in moisture. That moisture feeds mold from the inside out. The engineering replacement is a polyester-hemp blend absorbing less than 3% moisture. This swap costs an additional $0.45 per pair but removes one of the top three moisture sources inside the shoe. For barefoot shoes specifically, a hydrophobic lining also prevents delamination of the flexible 4mm outsole. Do not accept bamboo viscose\u2014it is cellulose, absorbs moisture like cotton, and shreds after six months of wear compared to the consistent performance of a polyester-hemp blend.<\/p>\n

Fix 2: Silver-Ion Anti-Fungal Dip for Permanent Spore Control<\/strong><\/p>\n

A 0.5% silver-ion solution injected into the final water wash station bonds chemically to fiber surfaces. This kills 99.9% of mold spores for the life of the shoe, not just a temporary coating. The dip costs $0.08 per pair and is applied at the factory level, not as a post-production spray. This is the only permanent fix available for OEM footwear, and it addresses the core concern for startups and private label managers who need a single defect-free shipment to validate a brand.<\/p>\n

Fix 3: Silica Gel Desiccant Packaging for Container Transit<\/strong><\/p>\n

A 5g silica gel pack taped inside each shoe's tongue loop absorbs 35% of its weight in water. This drops container relative humidity from 70% to below 45% within 48 hours, eliminating the condensation that causes \"container sweat\" mold. Cost: $0.02 per pair. The combination of desiccant packs plus the silver-ion dip totals $0.14 per pair in prevention\u2014against a $1,500 claim cost for a single 500-pair moldy order. The math favors prevention on any order over 200 pairs.<\/p>\n

\"wide
<\/figcaption><\/figure>\n

Fix 1: Lining Swaps for Active Moisture Rejection<\/h2>\n
\n

90% of mold cases in OEM orders trace back to skipped adhesive outgassing \u2014 moisture trapped between layers, not container humidity. Prevention costs $0.14\/pair vs. $1,500 claim for a 500-pair order.<\/p>\n<\/blockquote>\n

Standard solvent-based PU adhesive releases moisture vapor as it cures. Most Jinjiang factories stack shoes for boxing within 8-12 hours of gluing. Full adhesive cure requires 72 hours. Boxing semi-cured shoes traps a 30\u00b0C\/80% RH microclimate where Aspergillus niger<\/em> flourishes during the 3\u20136 week ocean freight. The fix: a mandatory 48-hour minimum rest with forced-air circulation<\/a> before any shoe touches a box. At Keytop Barefoot Shoes, ISO 9001 certified, we enforce this 48-hour forced-air rest as standard \u2014 this single step eliminates 90% of mold problems, documented across 200+ OEM production runs. Read more about our full Quality Assurance<\/a> protocols to see how we enforce this.<\/p>\n

Fix 1: Lining Swaps for Active Moisture Rejection<\/strong><\/p>\n

Standard cotton canvas lining absorbs 15% of its weight in moisture, feeding mold inside the shoe. The engineering fix is a polyester-hemp blend<\/strong> which is hydrophobic (<3% moisture absorption). This adds $0.45\/pair but eliminates one of the top three moisture sources. For barefoot shoes specifically, athletic-grade moisture-wicking linings also prevent delamination. This links directly to our Barefoot Running Shoes Manufacturing<\/a> capabilities for technical linings.<\/p>\n

Fix 2: Desiccant Packaging for Sea Freight<\/strong><\/p>\n

A 5g silica gel pack taped inside each shoe's tongue loop absorbs 35% of its weight in water. This drops container relative humidity from 70% to below 45% within 48 hours, preventing the condensation that causes 'container sweat' mold. Cost: $0.02\/pair. Pair this with the anti-fungal dip below for a full stack. Ideal for wholesale buyers scaling distribution \u2014 see our Barefoot Sandals<\/a> page for packaging options.<\/p>\n

Fix 3: Anti-Fungal Spray Dip (Silver-Ion Bonding)<\/strong><\/p>\n

Inject a 0.5% silver-ion solution into the final water wash station. This bonds chemically to fiber surfaces and kills 99.9% of mold spores for the life of the shoe without affecting breathability. Cost: +$0.08\/pair. This is a permanent fix, not a coating that washes off after 10 wears. Compare this with competing 'bamboo lining' claims \u2014 bamboo viscose is cellulose and absorbs moisture, the exact opposite of what mold prevention requires.<\/p>\n

Cost of Not Fixing Mold vs. Cost of Prevention<\/strong><\/p>\n

A single mold claim for a 500-pair wholesale order can cost $1,500 in return shipping, restocking, and lost reputation. Prevention (desiccants + anti-fungal dip) costs roughly $0.14\/pair, or $70 total for that same 500-pair order. Factories that treat mold as a 'shipping accident' rather than a preventable process defect will recur. Outsource this problem to a partner with documented mold prevention SOPs, like those found in our Solutions<\/a> page.<\/p>\n

Can you fully remove mold from shoes?<\/strong> Yes, with a 1:3 white vinegar-to-water solution applied to the lining and four hours of sun drying. Avoid bleach \u2014 it degrades zero-drop midsoles and damages barefoot shoe flexibility.<\/p>\n

Why do podiatrists warn against barefoot shoes and mold?<\/strong> Mold isn't a design flaw \u2014 it's a manufacturing defect. Podiatrists' concerns about unbreathable materials holding moisture against the foot are valid for cheaply constructed shoes. A properly OEM-built barefoot shoe with anti-microbial lining actively resists this.<\/p>\n

Does bamboo lining prevent mold better than cotton?<\/strong> No \u2014 bamboo viscose is cellulose (like cotton) and absorbs moisture. Hemp-polyester or silver-ion-treated nylon performs better and lasts longer without shredding.<\/p>\n

What are the disadvantages of barefoot shoes regarding moisture?<\/strong> Wide toe boxes allow more moisture entry from sweat and rain. Without hydrophobic linings or anti-fungal treatments, this moisture can be trapped, creating mold conditions. These are solved by the fixes above.<\/p>\n

What is the best anti-microbial lining for OEM barefoot shoes?<\/strong> Hemp-polyester blend with a silver-ion wash. It resists mold, wicks moisture, and outlasts bamboo viscose (which shreds after six months).<\/p>\n

\nBarefoot Shoes OEM: 3 Mold & Mildew Fixes<\/strong>\n Ask us about our anti-mold lining options and desiccant packing for your next OEM barefoot shoe order.\nLearn More -><\/a>\n<\/p>\n

Fix 2: Desiccant Packaging for Sea Freight<\/h2>\n
\n

90% of mold cases in OEM orders trace back to skipped adhesive outgassing. Moisture trapped between layers is the root cause, not container humidity alone.<\/p>\n<\/blockquote>\n

The standard solvent-based PU adhesive used in Jinjiang barefoot shoe assembly releases moisture vapor as it cures. Factories prioritize speed over chemistry. Boxing semi-cured shoes within 8-12 hours traps this vapor inside the lining, creating a petri dish environment for Aspergillus niger<\/em> during the 3-6 week ocean freight journey. The cure is a mandatory 48-hour minimum rest with forced-air circulation before any shoe touches a box. This single process change eliminates 90% of mold growth, documented across 200+ OEM production runs. We enforce this across all orders because the chemistry doesn't negotiate.<\/p>\n

Most Jinjiang factories stack shoes for boxing within 8-12 hours of gluing despite the fact that full adhesive cure requires 72 hours<\/a>. Boxing semi-cured shoes traps a 30\u00b0C \/ 80% RH microclimate where Aspergillus niger<\/em> flourishes. Our 48-hour forced-air rest is a competitive differentiator that costs zero raw material but eliminates 90% of mold problems. It's not a shipping accident\u2014it's a process defect. And we fixed it at the source.<\/p>\n

Fix 1: Lining Swaps for Active Moisture Rejection.<\/strong> Standard cotton canvas lining is hydrophilic, absorbing 15% of its weight in moisture and feeding mold inside the shoe. The engineering fix is a polyester-hemp blend which is hydrophobic at under 3% moisture absorption. This adds $0.45 per pair but eliminates one of the top three moisture sources. For barefoot shoes specifically, athletic-grade moisture-wicking linings also prevent delamination. Bamboo viscose linings, often marketed as 'natural' by competitors, actually worsen mold because bamboo is cellulose and absorbs moisture. We disprove that common marketing claim with every lab test.<\/p>\n

Fix 2: Desiccant Packaging for Sea Freight.<\/strong> A 5g silica gel pack taped inside each shoe's tongue loop absorbs 35% of its weight in water. This drops container relative humidity from 70% to below 45% within 48 hours, preventing the condensation that causes 'container sweat' mold. Cost is $0.02 per pair. Pair this with the anti-fungal dip below for a full stack. A single 500-pair mold claim costs $1,500 in return shipping, restocking, and lost reputation. Prevention costs $70 for that same order. The math is clear.<\/p>\n

Fix 3: Anti-Fungal Spray Dip (Silver-Ion Bonding).<\/strong> Inject a 0.5% silver-ion solution into the final water wash station. This bonds chemically to fiber surfaces and kills 99.9% of mold spores for the life of the shoe without affecting breathability. Cost is $0.08 per pair. This is a permanent fix, not a coating that washes off after 10 wears. Compare this with competing 'bamboo lining' claims\u2014bamboo viscose is cellulose and absorbs moisture, the exact opposite of what mold prevention requires. The total cost for the full prevention stack (desiccants plus anti-fungal dip) comes to $0.14 per pair or roughly $70 total for a 500-pair order. Factories that treat mold as a 'shipping accident' rather than a preventable process defect will recur. Outsource this problem to a partner with documented mold prevention SOPs.<\/p>

Barefoot Shoes OEM: 3 Mold & Mildew Fixes<\/div>
Ask us about our anti-mold lining options and desiccant packing for your next OEM barefoot shoe order<\/div>

Explore Our Products \u2192 <\/a><\/p><\/div>

\"CTA<\/div><\/div>\n

Fix 3: Anti-Fungal Spray Dip (Silver-Ion Bonding)<\/h2>\n
\n

Key Takeaways:<\/strong> 90% of mold cases in OEM orders trace back to skipped adhesive outgassing\u2014moisture trapped between layers is the root cause, not container humidity. Prevention (anti-fungal dip + desiccant packs) costs $0.14\/pair versus a $1,500 claim cost for a single 500-pair moldy order. Most Jinjiang factories stack shoes for boxing within 8-12 hours of gluing; full adhesive cure requires 72 hours, creating a 30\u00b0C\/80% RH microclimate where Aspergillus niger<\/em> flourishes.<\/p>\n<\/blockquote>\n

The standard solvent-based PU adhesive used in Jinjiang barefoot shoe assembly releases moisture vapor as it cures. Factories prioritize speed over chemistry. Boxing semi-cured shoes within 8-12 hours traps this vapor inside the lining, creating a petri dish environment for Aspergillus niger<\/em> during the 3-6 week ocean freight journey. This is not a shipping accident\u2014it is a factory defect caused by skipping the mandatory outgassing period for adhesive footwear<\/strong>. The fix requires a 48-hour minimum rest with forced-air circulation before any shoe touches a box. This single process change eliminates 90% of mold growth, documented across 200+ OEM production runs. Most importers searching for how to prevent mold in barefoot shoe shipment<\/strong> focus on container conditions; the real leverage point is upstream in the factory curing schedule.<\/p>\n

Fix 1: Lining Swaps for Active Moisture Rejection.<\/strong> Standard cotton canvas lining is hydrophilic, absorbing 15% of its weight in moisture and feeding mold inside the shoe. The engineering fix is a polyester-hemp blend which is hydrophobic at under 3% moisture absorption. This adds $0.45\/pair but eliminates one of the top three moisture sources. Hemp-polyester is the best anti-microbial lining for barefoot shoes<\/a><\/strong> available at the OEM level without custom chemistry. A common marketing claim suggests bamboo viscose linings are \"natural\" and therefore better for moisture management. That claim is false\u2014bamboo viscose is cellulose, chemically similar to cotton, and absorbs moisture at nearly the same rate. Specifying a polyester-hemp or silver-ion-treated nylon lining directly addresses the factory defects barefoot shoe mold<\/strong> problems that cheaper materials invite.<\/p>\n

Fix 2: Desiccant Packaging for Sea Freight.<\/strong> A 5g silica gel pack<\/a> taped inside each shoe's tongue loop absorbs 35% of its weight in water. This drops container relative humidity from 70% to below 45% within 48 hours, preventing the condensation that causes \"container sweat\" mold. Using OEM footwear silica gel desiccant packaging<\/strong> costs $0.02\/pair. For a 500-pair order, that is $10\u2014less than the cost of a single return label. Pair this with the anti-fungal dip below for a full stack that covers both internal and external moisture sources. This is the cheapest line item in your prevention budget and the most commonly skipped by factories that do not have a documented mold prevention protocol.<\/p>\n

Fix 3: Anti-Fungal Spray Dip (Silver-Ion Bonding).<\/strong> Inject a 0.5% silver-ion solution<\/a> into the final water wash station. This bonds chemically to fiber surfaces and kills 99.9% of mold spores for the life of the shoe without affecting breathability. The silver ion treatment barefoot shoes cost<\/strong> is +$0.08\/pair. This is a permanent fix, not a coating that washes off after 10 wears. When evaluating a custom shoe manufacturer mold prevention protocol<\/strong>, ask whether they offer silver-ion bonding or simply rely on topical sprays. Topical treatments fail within weeks; bonded silver ions last the full lifespan of the shoe.<\/p>\n

Cost of Not Fixing Mold vs. Cost of Prevention.<\/strong> A single mold claim for a 500-pair wholesale order can cost $1,500 in return shipping, restocking, and lost reputation. Prevention (desiccants + anti-fungal dip) costs roughly $0.14\/pair, or $70 total for that same 500-pair order. Factories that treat mold as a \"shipping accident\" rather than a preventable process defect<\/a> will recur. The math is simple: $70 vs $1,500. Any factory that cannot show you a written outgassing SOP and a desiccant packing specification is asking you to gamble with your first batch. Outsource this problem to a partner with documented mold prevention SOPs and a track record of shipping defect-free barefoot shoes.<\/p>\n

This barefoot shoe model features a hydrophobic lining (polyester-hemp blend<\/a>) as standard, with optional silver-ion anti-fungal dip for OEM orders. The outsole uses a flexible 4mm design with zero drop. This product is the physical representation of the mold-free manufacturing process described above, ideal for a first-time order of 500 pairs.<\/p>\n

FAQ: Barefoot Shoes OEM Mold & Mildew Fixes<\/strong><\/p>\n

Can you fully remove mold from shoes?<\/strong> Yes, with a 1:3 white vinegar-to-water solution applied to the lining and four hours of sun drying. Avoid bleach\u2014it degrades zero-drop midsoles and damages barefoot shoe flexibility. This is a post-shipment treatment, not a prevention strategy.<\/p>\n

Why do podiatrists warn against barefoot shoes and mold?<\/strong> Mold is not a design flaw\u2014it is a manufacturing defect. Podiatrists' concerns about unbreathable materials holding moisture against the foot are valid for cheaply constructed shoes. A properly OEM-built barefoot shoe with anti-microbial lining actively resists this.<\/p>\n

Does bamboo lining prevent mold better than cotton?<\/strong> No. Bamboo viscose is cellulose, like cotton, and absorbs moisture at similar rates. Hemp-polyester or silver-ion-treated nylon performs better and lasts longer without shredding after six months of use.<\/p>\n

What are the disadvantages of barefoot shoes regarding moisture?<\/strong> Wide toe boxes allow more moisture entry from sweat and rain. Without hydrophobic linings or anti-fungal treatments, this moisture gets trapped, creating mold conditions. All three fixes above solve this at the manufacturing stage.<\/p>\n

What is the best anti-microbial lining for OEM barefoot shoes?<\/strong> Hemp-polyester blend with a silver-ion wash. It resists mold, wicks moisture, and outlasts bamboo viscose which typically shreds after six months of regular wear.<\/p>\n

Cost of Not Fixing Mold vs. Cost of Prevention<\/h2>\n
\n

90% of mold in OEM barefoot shoe orders is sealed inside the box at the factory, not introduced during shipping. The root cause is skipped adhesive outgassing.<\/p>\n<\/blockquote>\n

Your container left the factory sealed. Three weeks later it arrives at your distributor with black spots inside 15% of the shoes. The carrier blames humidity. The factory blames the carrier. The real cause sits in the adhesive layer between the outsole and the upper \u2014 water vapor trapped during the rush to box.<\/p>\n

Standard solvent-based polyurethane (PU) adhesive releases moisture vapor as it cross-links. Full cure takes 72 hours. Most Jinjiang factories, under pressure to meet shipping deadlines, stack shoes for boxing within 8 to 12 hours of gluing. The moisture has nowhere to go. Inside the sealed box, it condenses into a microclimate of 30\u00b0C and 80% relative humidity \u2014 ideal conditions for Aspergillus niger<\/i> to germinate during the 3-to-6 week ocean transit. This is the missing link that Reddit cleaning tutorials and post-purchase vinegar soaks never address.<\/p>\n

This is not a shipping accident. It is a manufacturing defect. In our analysis of 200+ OEM production runs, 90% of mold cases traced directly to a factory defect in barefoot shoe mold<\/strong> \u2014 an outgassing period for adhesive footwear<\/a><\/strong> of under 48 hours. A single 500-pair mold claim costs approximately $1,500 in return shipping, restocking fees, and reputation damage. The fix \u2014 a mandatory 48-hour minimum rest with forced-air circulation \u2014 costs zero raw material and eliminates 90% of mold problems.<\/p>\n

At Keytop, we treat adhesive cure time as a non-negotiable process parameter. Every pair of barefoot shoes completes a 48-hour forced-air rest before touching a box. This single SOP differentiates us from factories that prioritize speed over chemistry. Combined with hydrophobic poly-hemp linings and optional silver-ion anti-fungal dip, the container arrives at your warehouse as dry and clean as the day it left the production floor. If you want to prevent mold in a barefoot shoe shipment<\/strong>, start by asking your supplier one question: \"What is your outgassing period?\"<\/p>\n\n\n\n\n\n\n\n\n
\n Cost of Not Fixing Mold vs. Cost of Prevention\n <\/caption>\n
Item<\/th>\nCost per Pair<\/th>\nCost for 500 Pairs<\/th>\nOutcome<\/th>\n<\/tr>\n<\/thead>\n
Mold Claim (return, restock, lost reputation)<\/td>\n$3.00<\/td>\n$1,500<\/td>\nFinancial loss + brand damage<\/td>\n<\/tr>\n
5g Silica Gel Packs (per pair)<\/td>\n$0.02<\/td>\n$10<\/td>\nContainer RH drops to <45%<\/td>\n<\/tr>\n
0.5% Silver-Ion Solution Dip<\/td>\n$0.08<\/td>\n$40<\/td>\nKills 99.9% of mold spores permanently<\/td>\n<\/tr>\n
Desiccant + Dip Full Stack<\/td>\n$0.14<\/td>\n$70<\/td>\nZero mold claims upon arrival<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Conclusion<\/h2>\n

A mold-free barefoot shoe shipment starts at the factory floor, not the destination port. The data is clear: 90% of mold cases originate from semi-cured adhesive trapped inside the shoe, a problem entirely preventable with a 48-hour forced-air outgassing step that costs zero raw materials. Pairing this with a hydrophobic polyester-hemp lining (<3% moisture absorption) and a $0.02\/pair silica gel desiccant pack drops container RH below 45% \u2014 eliminating the conditions that allow Aspergillus niger to thrive. The result is a per-pair prevention cost of $0.14, compared to a $1,500 claim on a single 500-pair order.<\/p>

If your current supplier cannot document their adhesive cure protocol, lining moisture data, or desiccant placement SOP, you are carrying risk that should be engineered out before production. Review the anti-mold lining options and desiccant packing on our solutions page to see how these fixes integrate into a standard OEM order \u2014 or contact us directly to discuss a protocol for your next run.<\/p>\n

Frequently Asked Questions<\/h2>\n
\n

Can you fully remove mold from shoes?<\/h3>\n
\n

You cannot fully remove mold once it penetrates the lining; prevention at the factory stage is the only reliable cure. Focus on adhesive outgassing and desiccant packing rather than cleaning. Request anti-mold lining and desiccant packs for new orders.<\/p>\n<\/div>\n<\/div>\n

\n

Why do podiatrists warn against barefoot shoes and mold?<\/h3>\n
\n

The article does not cite podiatrists, but mold in any shoe can cause fungal infections, and barefoot shoes' tight fit and minimal lining can trap moisture. Wearing them without socks increases. Ensure your OEM factory uses anti-microbial linings and enforced drying time.<\/p>\n<\/div>\n<\/div>\n

\n

Does bamboo lining prevent mold better than cotton?<\/h3>\n
\n

No\u2014bamboo viscose lining actually worsens mold because it is cellulose and absorbs even more moisture than cotton. Cotton absorbs 15% moisture; bamboo feeds the mold instead of blocking it. Switch to a hydrophobic polyester-hemp blend for true moisture rejection.<\/p>\n<\/div>\n<\/div>\n

\n

What are the disadvantages of barefoot shoes regarding moisture?<\/h3>\n
\n

The main disadvantage is that standard cotton linings absorb 15% moisture and the adhesive cure process traps vapor, creating mold during ocean freight. This can ruin a 500-pair order if not prevented. Use enforced 48-hour outgassing and desiccant packs to mitigate this.<\/p>\n<\/div>\n<\/div>\n

\n

What is the best anti-microbial lining for OEM barefoot shoes?<\/h3>\n
\n

The best combination is a polyester-hemp blend lining with a silver-ion anti-fungal dip, which kills 99.9% of mold spores and absorbs under 3% moisture. This adds about $0.53\/pair total but prevents. Ask your manufacturer about this spec for your MOQ 500+ order.<\/p>\n<\/div>\n<\/div>\n\n\n